Cleaning water out of my axels

what is a good wash to use to clean out my axels since my vent tube came off when i was offroading and water got sucked in.

I use water. Then when it dries I use brake cleaner.

I usually just drain the milk out, wipe ut out best i can, then blast it a few times with brake cleaner, wipe it out again, then a couple blasts of wd 40.. Maybe shoot some air in there to blow crud out of the bearings and such..

Also remember seals are designed to keep oil in not water out so if you play alot in the water keep a eye on that stuff