5-wire Warn winch controller

[05X4X4]

Let me know how it works out. What kind of winch do you have? I have been thinking of getting one of those.

I have a Warn M8000, but from what I've read they are both 5wire controllers and they are wired the same. So hopefully with little modification they should work together.


Sent from my iPhone4 using Tapatalk

[05X4X4]

i have a 2 way momentary toggle switch if u need it

I have my original 2way momentary switch from the warn factory remote, that I hard wired into the cab after the rubber housing came apart. Thanks for the offer!


Sent from my iPhone4 using Tapatalk

[Mudhog1977]

Hey no problem they're getting hard to find a good one

[05X4X4]

That's no lie!! Since you brought it up... Where did you find that one?


Sent from my iPhone4 using Tapatalk

[05X4X4]

Well HF got me again. This wireless controller is crap, I can't get the darn thing todo anything.


Sent from my iPhone4 using Tapatalk

[Stouttrout]

Shucks,. i had hoped it would work

[05X4X4]

I have some feelers out on other forums, so maybe there's hope.


Sent from my iPhone4 using Tapatalk

[texasfrog]

You need to add a ground wire to the silonoids. Jump a wire from the black small wire on the silonoid (any one) and run it to ground. This changes it back to the old 3 wire system.

[05X4X4]

You need to add a ground wire to the silonoids. Jump a wire from the black small wire on the silonoid (any one) and run it to ground. This changes it back to the old 3 wire system.

Ok, the solenoid on the factory warn control pack?


Sent from my iPhone4 using Tapatalk

[texasfrog]

Yes,warn uses a grounding switch through the remote switch.when you push the switch to go one way or the other it grounds trough the switch.its stupid...but it makes it seam like you can't use nothing but a warn remote to the average person.
By bypassing that ground it makes it just like all the others 3 wire setup.

If you need me to talk you through it my number is 281-298-6769