engine swap!

[Mudhog1977]

Doing an engine swap on the broncoII, taking out the tired old 2.9 v6, and dropping in a 302 out of an 89 grand marquis
Out with the old


- - - Updated - - -



- - - Updated - - -



- - - Updated - - -

Time for the sawzall, won't fit

[indirocz28]

If at first you don't succeed, Sawzall it till it fits!

[Mudhog1977]

Its in!, next week is wiring and trans!


- - - Updated - - -



- - - Updated - - -

[MoparCody]

Me and my dad did that many years ago. We had an 89 bronco II that we stuck a 302 into and put 7in of lift onto it. That thing was awesome but defiently top heavy. Looks great. Keep the pics comming.

[Mudhog1977]

thanks cody, goin full width axles and gonna try to stretch the wheel base a lil, it is definitely heavier in the front now, and tryin to keep the lift as low as possible

[indirocz28]

Remember you can always use fullsize axles and make your track width wider, then design your suspension so that you have wide, yet low center of gravity.

[MoparCody]

thanks cody, goin full width axles and gonna try to stretch the wheel base a lil, it is definitely heavier in the front now, and tryin to keep the lift as low as possible

Thats gonna be awesome. Straight axle? A bronco II with full size axles is gonna look sick man. Cant wait to see it.

[indirocz28]

If you come across a set of full size axles from a ford with driver drop D44 and 8.8 or 9" for cheap, Please let me know

[Stouttrout]

Don;t leave it here, I will cut that top off and make it more Jeep Like.

[Mudhog1977]

If you come across a set of full size axles from a ford with driver drop D44 and 8.8 or 9" for cheap, Please let me know

Whatcha looking for? Full width or exploder 8.8?