Fire Extinguisher Mount

**Mark s** · 07-16-2012, 07:47 PM

I would cut you some if you like. Marc's cnc would cut them much cleaner though and I'll bet he's planning on cutting some anyway

. But I would be happy to cut them for you, you have to lift the plate though!

**SGT. K** · 07-17-2012, 02:36 PM

I will give him a shout and find out. Thanks I will let you know.

**TOYMINATOR** · 07-31-2012, 10:58 PM

Very similar design to the one I have. As you can see in the following pic, there are flat surface mount and cage mount versions available.

Quick Disconnect design with the pull of the rip cord. Mine is very accessible...

**PondSkum** · 08-01-2012, 03:40 PM

Shannon, what holds it to the roll bar and the extinguisher to the mount? and who makes that one?

EDIT: found the seller.. Defined Engineering.. couldn't read the little emblem on the picture at first.. http://www.definedengineering.com/store.html

**TOYMINATOR** · 08-01-2012, 11:03 PM

4 hose clamps are needed to clamp the mount to the cage and the extinguisher to the mount.

And yes, Defined Engineering is who makes this mount. Didn't realize they were selling them for $70 bucks though. They are a sponsor on my site and sent me one for free...it's good to be the king!