what is a good wash to use to clean out my axels since my vent tube came off when i was offroading and water got sucked in.
what is a good wash to use to clean out my axels since my vent tube came off when i was offroading and water got sucked in.
I use water. Then when it dries I use brake cleaner.
I usually just drain the milk out, wipe ut out best i can, then blast it a few times with brake cleaner, wipe it out again, then a couple blasts of wd 40.. Maybe shoot some air in there to blow crud out of the bearings and such..
2001 TJ - PondSkum
Build in progress....
"The wisest mind has something yet to learn." ~ George Santayana
Also remember seals are designed to keep oil in not water out so if you play alot in the water keep a eye on that stuff
Bookmarks